A “complete machine” which contains all the electronic and mechanical components required to manage gate positioning and the safety functions of the installation. Powerful and tireless, controlled by state of the art electronics, the automation is fitted with a powerful direct current motor backed up by a finely tuned double gear kinematic system which reduces the stress on the motor and structure caused by the movement of heavy gates.
Self-locking and reversible electromechanical automation system with a low voltage motor for residential & industrial sliding gates with a maximum weight of 3000kg.
Installation is possible on any structure and the unit may be fitted both to the right as well as to the left of the passageway.
The use of low voltage motors increase the performance, guarantee high efficiency, long life and silent running.
The integrated programmer allows encoder-controlled gate positioning and self-programming thus reducing installation times to a minimum and optimising the programming procedure. Repositioning takes place automatically whenever foreign objects get in the way of the gate as it is moving. The electronic control unit is completed by the anti-crush and “soft start” and “soft stop” functions.
Compatible with the INTPRG-4G system that allows the system parameters to be controlled and programmed remotely.
A slave motor, connected via cable with the Cardin MODCA slot-in modules inserted, can be installed to drive two biparting sliding gates.
Multi-decoding
The product range is factory fitted with a multi-decoding remote control module (system S449 - S486 - S504 - S508). By default the devices are supplied with a 433MHz RF module and the S504 / S508 series memory module inserted. To control the device with S449 transmitters, insert the ZGB24LC16-I / P memory module (supplied with the device) and consult the relevant section. For the S508 / S486 series purchase and insert the 868Mhz RF module.
Encoder-controlled self-locking unit 24V - max. weight 800kg
Graphic LCD display
Real-time clock
Built-in NiMH batteries
Maximum gate weight 800kg
Residential housing
Polyamide/steel gear rack with 6 lower fastening slits (30mm x 20mm x 1m)
Polyamide/steel gear rack with 6 upper fastening slits (30mm x 20mm x 1m)
Speed controller for sliding gates
Quartz receiver module (433MHz)
Quartz receiver module (433MHz)
Quartz receiver module (868MHz)
Quartz receiver module (868MHz)
Quartz transceiver module (433MHz)
Quartz transceiver module (868MHz)
300-code memory module (S449 - S486)
Memory module (max. 1000 codes)
Code and memory programming base via USB
3G interface
3G interface + Sim Vodafone (10-year subscription)
WiFi interface
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
Battery charger kit + NiMH batteries
A wired, interference-free Master/Slave interface. Due to its ability to function with cables up to 50 metres in length, it is suitable for large-scale installations.
Wired long-distance master/slave interface
433.92 MHz
Encoder-controlled self-locking unit 24V + batteries - max. weight 800kg
Graphic LCD display
Real-time clock
Built-in NiMH batteries
Maximum gate weight 800kg
Residential housing
Polyamide/steel gear rack with 6 lower fastening slits (30mm x 20mm x 1m)
Polyamide/steel gear rack with 6 upper fastening slits (30mm x 20mm x 1m)
Speed controller for sliding gates
Quartz receiver module (433MHz)
Quartz receiver module (433MHz)
Quartz receiver module (868MHz)
Quartz receiver module (868MHz)
Quartz transceiver module (433MHz)
Quartz transceiver module (868MHz)
300-code memory module (S449 - S486)
Memory module (max. 1000 codes)
Code and memory programming base via USB
3G interface
3G interface + Sim Vodafone (10-year subscription)
WiFi interface
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
A wired, interference-free Master/Slave interface. Due to its ability to function with cables up to 50 metres in length, it is suitable for large-scale installations.
Wired long-distance master/slave interface
433.92 MHz
Encoder-controlled reversible unit 24V - max. weight 1200kg
Reversible motor.
Graphic LCD display
Real-time clock
Collective housing
Residential housing
Maximum gate weight 1200kg
Steel gear rack for soldering (22mm x 22mm x 2m)
Steel gear rack with fastening slits (30mm x 12mm x 1m)
Screw spacers - lots of 30 pcs
Soldered spacers - lots of 30 pcs
Adjustable screw spacers - lots of 3 pcs
Speed controller for sliding gates
Quartz receiver module (433MHz)
Quartz receiver module (433MHz)
Quartz receiver module (868MHz)
Quartz receiver module (868MHz)
Quartz transceiver module (433MHz)
Quartz transceiver module (868MHz)
300-code memory module (S449 - S486)
Memory module (max. 1000 codes)
Code and memory programming base via USB
3G interface
3G interface + Sim Vodafone (10-year subscription)
WiFi interface
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
A wired, interference-free Master/Slave interface. Due to its ability to function with cables up to 50 metres in length, it is suitable for large-scale installations.
Wired long-distance master/slave interface
433.92 MHz
Encoder-controlled self-locking unit 24V - max. weight 1500kg
Built-in NiMH batteries
Graphic LCD display
Real-time clock
Maximum gate weight 1500kg
Industial building
Collective housing
Steel gear rack for soldering (22mm x 22mm x 2m)
Steel gear rack with fastening slits (30mm x 12mm x 1m)
Speed controller for sliding gates
Screw spacers - lots of 30 pcs
Soldered spacers - lots of 30 pcs
Adjustable screw spacers - lots of 3 pcs
Quartz receiver module (433MHz)
Quartz receiver module (433MHz)
Quartz receiver module (868MHz)
Quartz receiver module (868MHz)
Quartz transceiver module (433MHz)
Quartz transceiver module (868MHz)
300-code memory module (S449 - S486)
Memory module (max. 1000 codes)
Code and memory programming base via USB
3G interface
3G interface + Sim Vodafone (10-year subscription)
WiFi interface
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
Battery charger kit + NiMH batteries
A wired, interference-free Master/Slave interface. Due to its ability to function with cables up to 50 metres in length, it is suitable for large-scale installations.
Wired long-distance master/slave interface
433.92 MHz
Encoder-controlled self-locking unit 24V + batteries - max. weight 1500kg
Built-in NiMH batteries
Graphic LCD display
Real-time clock
Maximum gate weight 1500kg
Industial building
Collective housing
Steel gear rack for soldering (22mm x 22mm x 2m)
Steel gear rack with fastening slits (30mm x 12mm x 1m)
Speed controller for sliding gates
Screw spacers - lots of 30 pcs
Soldered spacers - lots of 30 pcs
Adjustable screw spacers - lots of 3 pcs
Quartz receiver module (433MHz)
Quartz receiver module (433MHz)
Quartz receiver module (868MHz)
Quartz receiver module (868MHz)
Quartz transceiver module (433MHz)
Quartz transceiver module (868MHz)
300-code memory module (S449 - S486)
Memory module (max. 1000 codes)
Code and memory programming base via USB
3G interface
3G interface + Sim Vodafone (10-year subscription)
WiFi interface
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
A wired, interference-free Master/Slave interface. Due to its ability to function with cables up to 50 metres in length, it is suitable for large-scale installations.
Wired long-distance master/slave interface
433.92 MHz
Encoder-controlled self-locking unit 24V - max. weight 3000kg
Built-in NiMH batteries
Graphic LCD display
Real-time clock
Maximum gate weight 3000kg
Industial building
Steel gear rack for soldering (22mm x 22mm x 2m)
Steel gear rack with fastening slits (30mm x 12mm x 1m)
Screw spacers - lots of 30 pcs
Soldered spacers - lots of 30 pcs
Adjustable screw spacers - lots of 3 pcs
Speed controller for sliding gates
Quartz receiver module (433MHz)
Quartz receiver module (433MHz)
Quartz receiver module (868MHz)
Quartz receiver module (868MHz)
Quartz transceiver module (433MHz)
Quartz transceiver module (868MHz)
300-code memory module (S449 - S486)
Memory module (max. 1000 codes)
Code and memory programming base via USB
3G interface
3G interface + Sim Vodafone (10-year subscription)
WiFi interface
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
A wired, interference-free Master/Slave interface. Due to its ability to function with cables up to 50 metres in length, it is suitable for large-scale installations.
Wired long-distance master/slave interface
433.92 MHz
Encoder-controlled self-locking unit 24V + batteries - max. weight 3000kg
Built-in NiMH batteries
Graphic LCD display
Real-time clock
Maximum gate weight 3000kg
Industial building
Steel gear rack for soldering (22mm x 22mm x 2m)
Steel gear rack with fastening slits (30mm x 12mm x 1m)
Screw spacers - lots of 30 pcs
Soldered spacers - lots of 30 pcs
Adjustable screw spacers - lots of 3 pcs
Speed controller for sliding gates
Quartz receiver module (433MHz)
Quartz receiver module (433MHz)
Quartz receiver module (868MHz)
Quartz receiver module (868MHz)
Quartz transceiver module (433MHz)
Quartz transceiver module (868MHz)
300-code memory module (S449 - S486)
Memory module (max. 1000 codes)
Code and memory programming base via USB
3G interface
3G interface + Sim Vodafone (10-year subscription)
WiFi interface
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
A wired, interference-free Master/Slave interface. Due to its ability to function with cables up to 50 metres in length, it is suitable for large-scale installations.
Wired long-distance master/slave interface
433.92 MHz
