Elettronica   |   Electronic programmers   |   Electronic programmers   |   PRG 24V

Electronic programmers microprocessor controlled for 24V motors

PRG 24V

Copertina PRG 24V
Motors powered by 24V
Opening and closing deceleration system
Self-learning
Multi-decoding
Built-in radio receiver card

Titolo sulla descrizione serie

Mains power supply 230Vac

Motor output 24Vdc

Protection grade IP55

Fireproofing grade V2

Automatic gate/door programming

Electronic devices for the control of automatic opening systems with one or two gate leaves: swing gates and garage doors. Powered by 24Vdc they intelligently manage the movement of the gate with timer-controlled movement.

They are equipped with a 433 or 868MHz FM radio receiver card.
Specially studied and designed for this type of use, these Cardin programmers are fitted with digital “step by step” time programming which is easily carried out in real time while the gate is moving thus reducing the installation time.

Monitoring the current consumption allows the control of a sophisticated anticrush safety system and the “soft start” and “soft stop” functions reduce the stress on the mechanical components.

The simplified programming method uses one button allowing all functions to be programmed rapidly.

All weather container ABS IP55 with wall fastening elements.

The electronic components are housed in a container with sealing gaskets and cable gland entry holes for the insertion of Ø16mm rigid tubes.

Discover the products

PRG900

PRG900

For the management of timer-controlled swing gates

Download the technical sheet
  • Allows the programmers to work during blackouts.
Battery charger kit + NiMH batteries

KBNIMH-1

Battery charger kit + NiMH batteries

  • Dispositivo che fornisce in uscita una tensione regolata a 24Vdc partendo da una tensione continua in ingresso che può variare da 19Vdc a 38Vdc. Dispone di due LED di segnalazione, uno per identificare la presenza di tensione in uscita e l’altro per dare informazioni sullo stato (funzionamento corretto, sovraccarico, protezione attivata).
Voltage regulator stabilized at 24V (series PRG900)

SELINTCV

The device supplies a regulated 24Vdc voltage in output

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
300-code memory module (S449 - S486)

ZGB24LC16-I/P

300-code memory module (S449 - S486)

  • The USB code and memory programming base allows the transmitters to be programmed in batches and remote code memorisation and replacement thanks to the RFID technology present in the series S504 transmitters and in the management software CARDINTX_SW.
Code and memory programming base via USB

PGBASE500

Code and memory programming base via USB

433.92 MHz

PRG900CB

PRG900CB

For the management of timer-controlled swing gates + battery charger and NiMH batteries

Built-in NiMH batteries

Built-in NiMH batteries

Download the technical sheet
  • Dispositivo che fornisce in uscita una tensione regolata a 24Vdc partendo da una tensione continua in ingresso che può variare da 19Vdc a 38Vdc. Dispone di due LED di segnalazione, uno per identificare la presenza di tensione in uscita e l’altro per dare informazioni sullo stato (funzionamento corretto, sovraccarico, protezione attivata).
Voltage regulator stabilized at 24V (series PRG900)

SELINTCV

The device supplies a regulated 24Vdc voltage in output

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • The USB code and memory programming base allows the transmitters to be programmed in batches and remote code memorisation and replacement thanks to the RFID technology present in the series S504 transmitters and in the management software CARDINTX_SW.
Code and memory programming base via USB

PGBASE500

Code and memory programming base via USB

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
300-code memory module (S449 - S486)

ZGB24LC16-I/P

300-code memory module (S449 - S486)

433.92 MHz

For any information, contact us without obligation

Required fields *

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.