Electromechanical gear motors suitable for gate positioning control and safety system management. Ideal for residential/industrial sliding gates powered by 230V.
Powerful, rapid and controlled by state of the art electronics, the unit is fitted with a powerful direct current motor backed up by a finely tuned double gear kinematic system which reduces the stress on the motor and structure caused by the movement of gates.
The reduction unit stator is made of die cast aluminium and contains a never ending screw and double reduction lubricated with grease.
Installation, on a robust and rust proof base, is possible on any structure and the unit may be fitted both to the right as well as to the left of the passageway.
The use of direct current motors increases the performance, guarantees high efficiency, long life and silent running.
The integrated programmer allows encoder-controlled gate positioning and self-programming thus reducing installation times to a minimum and optimising the programming procedure.
Gate repositioning takes place automatically whenever foreign objects get in the way of the gate as it is moving. The electronic control unit is completed by the anti-crush and “soft start” and “soft stop” functions.
Compatible with the INTPRG-4G system that allows the system parameters to be controlled and programmed remotely.
Open collector
The product range is factory set for the insertion of an open collector receiver card that guarantees compatibility with all the radio control series available in the Cardin catalogue.
Encoder-controlled self-locking 230V unit - max. weight 600kg
Maximum gate weight 600kg
Residential housing
Polyamide/steel gear rack with 6 lower fastening slits (30mm x 20mm x 1m)
Polyamide/steel gear rack with 6 upper fastening slits (30mm x 20mm x 1m)
Anchor plate
Speed controller for sliding gates
Manual release kit for external use, supplied with a steel cable
Mechanical travel limit adaptor
2-channel slot-in receiver card (5Vdc)
2-channel slot-in receiver card (5Vdc)
2-channel slot-in receiver card (5Vdc)
433MHz 2-channel open collector receiver card (5Vdc)
868MHz 2-channel open collector receiver card (5Vdc)
433MHz 2-channel open collector receiver card (5Vdc)
868MHz 2-channel open collector receiver card (5Vdc)
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
Encoder-controlled self-locking 230V unit - max. weight 800kg
Oil bath system
Maximum gate weight 800kg
Intensive use
Residential housing
Polyamide/steel gear rack with 6 lower fastening slits (30mm x 20mm x 1m)
Polyamide/steel gear rack with 6 upper fastening slits (30mm x 20mm x 1m)
Speed controller for sliding gates
Manual release kit for external use, supplied with a steel cable
Mechanical travel limit adaptor
Electronic heater
5 litres for SLEVO800
2-channel slot-in receiver card (5Vdc)
2-channel slot-in receiver card (5Vdc)
2-channel slot-in receiver card (5Vdc)
433MHz 2-channel open collector receiver card (5Vdc)
868MHz 2-channel open collector receiver card (5Vdc)
433MHz 2-channel open collector receiver card (5Vdc)
868MHz 2-channel open collector receiver card (5Vdc)
Anchor plate
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
Encoder-controlled self-locking 230V unit - max. weight 1200kg
Oil bath system
Maximum gate weight 1200kg
Industial building
Intensive use
Steel gear rack for soldering (22mm x 22mm x 2m)
Steel gear rack with fastening slits (30mm x 12mm x 1m)
Screw spacers - lots of 30 pcs
Soldered spacers - lots of 30 pcs
Adjustable screw spacers - lots of 3 pcs
Anchor plate
Speed controller for sliding gates
Manual release kit for external use, supplied with a steel cable
Mechanical travel limit adaptor
Electronic heater
5 litres for SLEVO1200
2-channel slot-in receiver card (5Vdc)
2-channel slot-in receiver card (5Vdc)
2-channel slot-in receiver card (5Vdc)
433MHz 2-channel open collector receiver card (5Vdc)
868MHz 2-channel open collector receiver card (5Vdc)
433MHz 2-channel open collector receiver card (5Vdc)
868MHz 2-channel open collector receiver card (5Vdc)
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
Encoder-controlled self-locking 230V unit - max. weight 2000kg
Oil bath system
Maximum gate weight 2000kg
Industial building
Steel gear rack for soldering (22mm x 22mm x 2m)
Steel gear rack with fastening slits (30mm x 12mm x 1m)
Screw spacers - lots of 30 pcs
Soldered spacers - lots of 30 pcs
Adjustable screw spacers - lots of 3 pcs
Anchor plate
Speed controller for sliding gates
Manual release kit for external use, supplied with a steel cable
Mechanical travel limit adaptor
1 litre for SLEVO2000
2-channel slot-in receiver card (5Vdc)
2-channel slot-in receiver card (5Vdc)
2-channel slot-in receiver card (5Vdc)
433MHz 2-channel open collector receiver card (5Vdc)
868MHz 2-channel open collector receiver card (5Vdc)
433MHz 2-channel open collector receiver card (5Vdc)
868MHz 2-channel open collector receiver card (5Vdc)
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
