Automation for rolling shutters

RL SERIES

Copertina RL SERIES
Motors powered by 230V

Titolo sulla descrizione serie

230V automation for shutters, rolling grills and roll-up garage doors with a cast aluminium geared motor and crown wheel. Available as a reversible geared motor and in self-locking versions with an integrated electromagnetic lock. The modular motor is rapid and easy to install even on pre-existing systems without having to dismantle the rolling shutter drive shaft and spring holders.

The reversible version is ideal for lockable roll-up garage doors, while the self-locking version with an electromagnetic lock and manual release cable is more suited to installations not featuring tradition locking systems such as lock & key, door bolts, padlocks and electric locks etc.

An ample range of electronic programmers and selector switches is available for the manual, automatic and semi-automatic control of the RL series of motors.

Discover the products

CRL170

CRL170

230V reversible geared motor without electric lock for rolling shutters, max. height 6m; shaft 60mm, crown wheel 220mm, maximum lifting power 180kg.

Maximum gate weight 180kg

Maximum gate weight 180kg

Reversible motor.

Reversible motor.

  • ECU for rolling grills or rolling shutters max. 1300W. Ideal for tubular motors or rolling shutters and fitted with with torque limitation, a programmable 24V warning light output (flashing or continuous activation) and a 230V courtesy light output.
  • Protection grade IP55
  • Overall dimensions 135 x 175 x 85
Electronic programmer controlling one 230V motor

T21X

For the management of motorized rolling grills and shutters

  • ECU for rolling grills or rolling shutters max. 1300W. Basic version upplied with a fitted RSQ504OC2 receiver card.
  • Overall dimensions 135 x 175 x 85
Electronic programmer controlling one 230V motor

T21B

For the management of motorized rolling grills and shutters

  • Centrale de commande pour volets roulants et grilles à enroulement en mode “homme-mort”.
  • Protection grade IP55
  • Overall dimensions 125 x 58 x 84
Command card controlling one 230V motor

T1

For the management of manually controlled motorized rolling grills and shutters

  • Logic integrated into the receiver with work time management and output for the control of one motor.
  • Suitable for the command of automatic rolling shutters, sun blinds and awnings.
  • Inputs for one opening and one closing command via cable.
  • Manual operation in either the opening/closing or only closing direction.

RPQ504T10

433MHz radio-programmer for rolling shutters (230V-1000W)

  • Logic integrated into the receiver with work time management and output for the control of one motor.
  • Suitable for the command of automatic rolling shutters, sun blinds and awnings.
  • Inputs for one opening and one closing command via cable.
  • Manual operation in either the opening/closing or only closing direction.

RPQ508T10

868MHz radio-programmer for rolling shutters (230V-1000W)

  • Logic integrated into the receiver and output for the control of one motor. Power supply output for a pair of Cardin photoelectric cells. Possibility of memorising up to 1000 transmitters.
  • All weather box in ABS - IP55.
  • Overall dimensions 139 x 115 x 44.

RPQ504

Radio-programmer for rolling shutters (230V-600W)

  • Logic integrated into the receiver and output for the control of one motor. Power supply output for a pair of Cardin photoelectric cells. Possibility of memorising up to 1000 transmitters.
  • All weather box in ABS - IP55.
  • Overall dimensions 139 x 115 x 44.

RPQ508

868MHz radio-programmer for rolling shutters (230V-600W)

SELRL1C

Key-operated surface-mounted switch in aluminium

SELRL3C

Aluminium surface-mount box with switch and release lever

  • Selector switch for the manual on-site activation of automatic gate and door systems. Container in cast aluminium with a shockproof plastic front piece. Anti-tampering system that is easy to install and easier to use.
  • Maximum voltage 30Vac-dc.
  • Maximum current 2A.
  • Open-close functions.
  • Overall dimensions 35 x 70 x 70.
Key-operated surface-mounted switch in aluminium

SELMEC/E1

Key-operated surface-mounted switch in aluminium

CRL170E

CRL170E

230V self-locking geared motor with an integrated electric lock for rolling shutters, max. height 6m; shaft 60mm, crown wheel 220mm, maximum lifting power 180kg.

Self-locking motor

Self-locking motor

Maximum gate weight 180kg

Maximum gate weight 180kg

  • ECU for rolling grills or rolling shutters max. 1300W. Ideal for tubular motors or rolling shutters and fitted with with torque limitation, a programmable 24V warning light output (flashing or continuous activation) and a 230V courtesy light output.
  • Protection grade IP55
  • Overall dimensions 135 x 175 x 85
Electronic programmer controlling one 230V motor

T21X

For the management of motorized rolling grills and shutters

  • ECU for rolling grills or rolling shutters max. 1300W. Basic version upplied with a fitted RSQ504OC2 receiver card.
  • Overall dimensions 135 x 175 x 85
Electronic programmer controlling one 230V motor

T21B

For the management of motorized rolling grills and shutters

  • Centrale de commande pour volets roulants et grilles à enroulement en mode “homme-mort”.
  • Protection grade IP55
  • Overall dimensions 125 x 58 x 84
Command card controlling one 230V motor

T1

For the management of manually controlled motorized rolling grills and shutters

  • Logic integrated into the receiver with work time management and output for the control of one motor.
  • Suitable for the command of automatic rolling shutters, sun blinds and awnings.
  • Inputs for one opening and one closing command via cable.
  • Manual operation in either the opening/closing or only closing direction.

RPQ504T10

433MHz radio-programmer for rolling shutters (230V-1000W)

  • Logic integrated into the receiver with work time management and output for the control of one motor.
  • Suitable for the command of automatic rolling shutters, sun blinds and awnings.
  • Inputs for one opening and one closing command via cable.
  • Manual operation in either the opening/closing or only closing direction.

RPQ508T10

868MHz radio-programmer for rolling shutters (230V-1000W)

  • Logic integrated into the receiver and output for the control of one motor. Power supply output for a pair of Cardin photoelectric cells. Possibility of memorising up to 1000 transmitters.
  • All weather box in ABS - IP55.
  • Overall dimensions 139 x 115 x 44.

RPQ504

Radio-programmer for rolling shutters (230V-600W)

  • Logic integrated into the receiver and output for the control of one motor. Power supply output for a pair of Cardin photoelectric cells. Possibility of memorising up to 1000 transmitters.
  • All weather box in ABS - IP55.
  • Overall dimensions 139 x 115 x 44.

RPQ508

868MHz radio-programmer for rolling shutters (230V-600W)

SELRL1C

Key-operated surface-mounted switch in aluminium

SELRL3C

Aluminium surface-mount box with switch and release lever

  • Selector switch for the manual on-site activation of automatic gate and door systems. Container in cast aluminium with a shockproof plastic front piece. Anti-tampering system that is easy to install and easier to use.
  • Maximum voltage 30Vac-dc.
  • Maximum current 2A.
  • Open-close functions.
  • Overall dimensions 35 x 70 x 70.
Key-operated surface-mounted switch in aluminium

SELMEC/E1

Key-operated surface-mounted switch in aluminium

CRL180E

CRL180E

230V self-locking geared motor with an integrated electric lock for rolling shutters, max. height 6m; shaft 76mm, crown wheel 240mm, maximum lifting power 180kg.

Maximum gate weight 180kg

Maximum gate weight 180kg

Self-locking motor

Self-locking motor

  • ECU for rolling grills or rolling shutters max. 1300W. Ideal for tubular motors or rolling shutters and fitted with with torque limitation, a programmable 24V warning light output (flashing or continuous activation) and a 230V courtesy light output.
  • Protection grade IP55
  • Overall dimensions 135 x 175 x 85
Electronic programmer controlling one 230V motor

T21X

For the management of motorized rolling grills and shutters

  • ECU for rolling grills or rolling shutters max. 1300W. Basic version upplied with a fitted RSQ504OC2 receiver card.
  • Overall dimensions 135 x 175 x 85
Electronic programmer controlling one 230V motor

T21B

For the management of motorized rolling grills and shutters

  • Centrale de commande pour volets roulants et grilles à enroulement en mode “homme-mort”.
  • Protection grade IP55
  • Overall dimensions 125 x 58 x 84
Command card controlling one 230V motor

T1

For the management of manually controlled motorized rolling grills and shutters

  • Logic integrated into the receiver with work time management and output for the control of one motor.
  • Suitable for the command of automatic rolling shutters, sun blinds and awnings.
  • Inputs for one opening and one closing command via cable.
  • Manual operation in either the opening/closing or only closing direction.

RPQ504T10

433MHz radio-programmer for rolling shutters (230V-1000W)

  • Logic integrated into the receiver with work time management and output for the control of one motor.
  • Suitable for the command of automatic rolling shutters, sun blinds and awnings.
  • Inputs for one opening and one closing command via cable.
  • Manual operation in either the opening/closing or only closing direction.

RPQ508T10

868MHz radio-programmer for rolling shutters (230V-1000W)

  • Logic integrated into the receiver and output for the control of one motor. Power supply output for a pair of Cardin photoelectric cells. Possibility of memorising up to 1000 transmitters.
  • All weather box in ABS - IP55.
  • Overall dimensions 139 x 115 x 44.

RPQ504

Radio-programmer for rolling shutters (230V-600W)

  • Logic integrated into the receiver and output for the control of one motor. Power supply output for a pair of Cardin photoelectric cells. Possibility of memorising up to 1000 transmitters.
  • All weather box in ABS - IP55.
  • Overall dimensions 139 x 115 x 44.

RPQ508

868MHz radio-programmer for rolling shutters (230V-600W)

SELRL1C

Key-operated surface-mounted switch in aluminium

SELRL3C

Aluminium surface-mount box with switch and release lever

  • Selector switch for the manual on-site activation of automatic gate and door systems. Container in cast aluminium with a shockproof plastic front piece. Anti-tampering system that is easy to install and easier to use.
  • Maximum voltage 30Vac-dc.
  • Maximum current 2A.
  • Open-close functions.
  • Overall dimensions 35 x 70 x 70.
Key-operated surface-mounted switch in aluminium

SELMEC/E1

Key-operated surface-mounted switch in aluminium

CRL360DE

CRL360DE

230V self-locking geared motor with two motors and integrated electric lock for rolling shutters, max. height 6m; shaft 76mm, crown wheel 240mm, maximum lifting power 360kg.

Self-locking motor

Self-locking motor

Maximum gate weight 350kg

Maximum gate weight 350kg

  • ECU for rolling grills or rolling shutters max. 1300W. Ideal for tubular motors or rolling shutters and fitted with with torque limitation, a programmable 24V warning light output (flashing or continuous activation) and a 230V courtesy light output.
  • Protection grade IP55
  • Overall dimensions 135 x 175 x 85
Electronic programmer controlling one 230V motor

T21X

For the management of motorized rolling grills and shutters

  • ECU for rolling grills or rolling shutters max. 1300W. Basic version upplied with a fitted RSQ504OC2 receiver card.
  • Overall dimensions 135 x 175 x 85
Electronic programmer controlling one 230V motor

T21B

For the management of motorized rolling grills and shutters

  • Centrale de commande pour volets roulants et grilles à enroulement en mode “homme-mort”.
  • Protection grade IP55
  • Overall dimensions 125 x 58 x 84
Command card controlling one 230V motor

T1

For the management of manually controlled motorized rolling grills and shutters

  • Logic integrated into the receiver with work time management and output for the control of one motor.
  • Suitable for the command of automatic rolling shutters, sun blinds and awnings.
  • Inputs for one opening and one closing command via cable.
  • Manual operation in either the opening/closing or only closing direction.

RPQ504T10

433MHz radio-programmer for rolling shutters (230V-1000W)

  • Logic integrated into the receiver with work time management and output for the control of one motor.
  • Suitable for the command of automatic rolling shutters, sun blinds and awnings.
  • Inputs for one opening and one closing command via cable.
  • Manual operation in either the opening/closing or only closing direction.

RPQ508T10

868MHz radio-programmer for rolling shutters (230V-1000W)

  • Logic integrated into the receiver and output for the control of one motor. Power supply output for a pair of Cardin photoelectric cells. Possibility of memorising up to 1000 transmitters.
  • All weather box in ABS - IP55.
  • Overall dimensions 139 x 115 x 44.

RPQ504

Radio-programmer for rolling shutters (230V-600W)

  • Logic integrated into the receiver and output for the control of one motor. Power supply output for a pair of Cardin photoelectric cells. Possibility of memorising up to 1000 transmitters.
  • All weather box in ABS - IP55.
  • Overall dimensions 139 x 115 x 44.

RPQ508

868MHz radio-programmer for rolling shutters (230V-600W)

SELRL1C

Key-operated surface-mounted switch in aluminium

SELRL3C

Aluminium surface-mount box with switch and release lever

  • Selector switch for the manual on-site activation of automatic gate and door systems. Container in cast aluminium with a shockproof plastic front piece. Anti-tampering system that is easy to install and easier to use.
  • Maximum voltage 30Vac-dc.
  • Maximum current 2A.
  • Open-close functions.
  • Overall dimensions 35 x 70 x 70.
Key-operated surface-mounted switch in aluminium

SELMEC/E1

Key-operated surface-mounted switch in aluminium

For any information, contact us without obligation

Required fields *

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.