Elettronica   |   Electronic programmers   |   Electronic programmers   |   PRG TOP 24V

Electronic programmers microprocessor controlled for 24V motors

PRG TOP 24V

Copertina PRG TOP 24V
Graphic LCD display
Real-time clock
Compatible with network interface
Motors powered by 24V
Magnetic encoder control
Opening and closing deceleration system
Self-learning
Multi-decoding
Built-in radio receiver card
Bluetooth compatible

Titolo sulla descrizione serie

Mains power supply 230Vac

Motor output 24Vdc

Protection grade IP55

Fireproofing grade V2

Automatic gate/door programming

Electronic devices for the control of automatic opening systems with one or two gate leaves: swing gates and garage doors. Powered by 24Vdc they intelligently manage the movement of the gate with gate positioning control and encoder.

They are equipped with a 433 or 868MHz FM radio receiver card.
Specially studied and designed for this type of use, these Cardin programmers are fitted with digital “step by step” time programming which is easily carried out in real time while the gate is moving thus reducing the installation time.

Monitoring the current consumption allows the control of a sophisticated anticrush safety system and the “soft start” and “soft stop” functions reduce the stress on the mechanical components.

The simplified programming method uses one or two buttons (depending on the version) allowing all functions to be programmed rapidly.

All weather container ABS IP55 with wall fastening elements.

The electronic components of the CC242ETOP series are housed in a container with sealing gaskets and cable gland entry holes for the insertion of Ø16mm rigid tubes.

The electronic components of the CC242EXTOPCB series are housed in a container with sealing gaskets with:

Cover closing system using rapid action hooks.

Removable plaque factory set for the fastening of up to five cable clamps.

Air circulation slits built into the container.

Removable support in nylon fibre housing the electronic appliances on DIN rails.

A Ø21mm cable clamp and two Ø16mm cable clamps.

Discover the products

CC242ETOP

CC242ETOP

For the management of encoder-controlled swing gates

Download the technical sheet
  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
300-code memory module (S449 - S486)

ZGB24LC16-I/P

300-code memory module (S449 - S486)

  • The USB code and memory programming base allows the transmitters to be programmed in batches and remote code memorisation and replacement thanks to the RFID technology present in the series S504 transmitters and in the management software CARDINTX_SW.
Code and memory programming base via USB

PGBASE500

Code and memory programming base via USB

  • The 3G interface allows the control, diagnostics and programming of system parameters from a remote location using the Cardin App.
3G interface

INTPRG-3G

3G interface

  • The 3G interface allows the control, diagnostics and programming of system parameters from a remote location using the Cardin App.
  • Includes a Vodafone SIM + ten year subscription.
3G interface + Sim Vodafone

INTPRG-3G10

3G interface + Sim Vodafone (10-year subscription)

  • The WF interface allows the control, diagnostics and programming of system parameters from a remote location using the Cardin App.
WiFi interface

INTPRG-WF

WiFi interface

  • Diagnostic interface fitted with 8 LEDs that represent respectively the status of the 8 relay outputs.
  • The status of the gate/boom and of the safety devices and controls of the system can be obtained by connecting the interface to a compatible Cardin control unit via MODBT Bluetooth or MODCA cable.
  • The Bluetooth module is to be ordered separately.
Diagnostic interface via cable/bluetooth

SELINTBT8

Diagnostic interface fitted with 8 LEDs that represent respectively the status of the 8 relay outputs

  • The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.

Bluetooth module

MODBT

Bluetooth interface module for the X24 multi-decoding series

  • The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.

Data interface module via cable

MODCA

Data interface module via cable (master/slave)

  • Allows the programmers to work during blackouts.
Battery charger kit + NiMH batteries

KBNIMH-1

Battery charger kit + NiMH batteries

433.92 MHz

CC242ETOPCB

CC242ETOPCB

For the management of encoder-controlled swing gates + battery charger and NiMH batteries

Built-in NiMH batteries

Built-in NiMH batteries

Download the technical sheet
  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • The USB code and memory programming base allows the transmitters to be programmed in batches and remote code memorisation and replacement thanks to the RFID technology present in the series S504 transmitters and in the management software CARDINTX_SW.
Code and memory programming base via USB

PGBASE500

Code and memory programming base via USB

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
300-code memory module (S449 - S486)

ZGB24LC16-I/P

300-code memory module (S449 - S486)

  • The 3G interface allows the control, diagnostics and programming of system parameters from a remote location using the Cardin App.
3G interface

INTPRG-3G

3G interface

  • The 3G interface allows the control, diagnostics and programming of system parameters from a remote location using the Cardin App.
  • Includes a Vodafone SIM + ten year subscription.
3G interface + Sim Vodafone

INTPRG-3G10

3G interface + Sim Vodafone (10-year subscription)

  • The WF interface allows the control, diagnostics and programming of system parameters from a remote location using the Cardin App.
WiFi interface

INTPRG-WF

WiFi interface

  • Diagnostic interface fitted with 8 LEDs that represent respectively the status of the 8 relay outputs.
  • The status of the gate/boom and of the safety devices and controls of the system can be obtained by connecting the interface to a compatible Cardin control unit via MODBT Bluetooth or MODCA cable.
  • The Bluetooth module is to be ordered separately.
Diagnostic interface via cable/bluetooth

SELINTBT8

Diagnostic interface fitted with 8 LEDs that represent respectively the status of the 8 relay outputs

  • The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.

Bluetooth module

MODBT

Bluetooth interface module for the X24 multi-decoding series

  • The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.

Data interface module via cable

MODCA

Data interface module via cable (master/slave)

433.92 MHz

CC242EXTOPCB

CC242EXTOPCB

For the management of encoder-controlled swing gates + battery charger and NiMH batteries

Built-in NiMH batteries

Built-in NiMH batteries

Download the technical sheet
  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
300-code memory module (S449 - S486)

ZGB24LC16-I/P

300-code memory module (S449 - S486)

  • The USB code and memory programming base allows the transmitters to be programmed in batches and remote code memorisation and replacement thanks to the RFID technology present in the series S504 transmitters and in the management software CARDINTX_SW.
Code and memory programming base via USB

PGBASE500

Code and memory programming base via USB

  • The 3G interface allows the control, diagnostics and programming of system parameters from a remote location using the Cardin App.
3G interface

INTPRG-3G

3G interface

  • The 3G interface allows the control, diagnostics and programming of system parameters from a remote location using the Cardin App.
  • Includes a Vodafone SIM + ten year subscription.
3G interface + Sim Vodafone

INTPRG-3G10

3G interface + Sim Vodafone (10-year subscription)

  • The WF interface allows the control, diagnostics and programming of system parameters from a remote location using the Cardin App.
WiFi interface

INTPRG-WF

WiFi interface

  • Diagnostic interface fitted with 8 LEDs that represent respectively the status of the 8 relay outputs.
  • The status of the gate/boom and of the safety devices and controls of the system can be obtained by connecting the interface to a compatible Cardin control unit via MODBT Bluetooth or MODCA cable.
  • The Bluetooth module is to be ordered separately.
Diagnostic interface via cable/bluetooth

SELINTBT8

Diagnostic interface fitted with 8 LEDs that represent respectively the status of the 8 relay outputs

  • The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.

Bluetooth module

MODBT

Bluetooth interface module for the X24 multi-decoding series

  • The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.

Data interface module via cable

MODCA

Data interface module via cable (master/slave)

433.92 MHz

For any information, contact us without obligation

Required fields *

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.