Automazioni   |   Swing gates   |   Underground automation for swing gates   |   HL SERIES

Underground automation for swing gates

HL SERIES

Copertina HL SERIES
Self-locking motor

Titolo sulla descrizione serie

The automation is made up of a series of components consisting of an electronic programmer, one or two sealed self-locking operators complete with embedding cases and a special connecting cable. The robust and reliable electromechanical operator guarantees optimum performance under all working conditions and its system of ball bearing balanced pivoting levers guarantees regular and silent running.

The hot dip galvanized or stainless steel embedding cases are guaranteed to remain rust free throughout time.

Particularly suited for installations that do not allow column installations or where the automation has to be completely hidden.

The units do not feature on board electronics and we advise you to use a Cardin electronic programmer:

PRG230M2 for 1 or 2 230V motors.

CC242ETOPCB - CC242EXTOPCB for 1 or 2 24V motors.

On the 24V model gate position is encoder controlled and self-programming thus reducing installation times to a minimum and optimising the programming procedure. Repositioning takes place automatically whenever foreign objects get in the way of the gate as it is moving.

The electronic control unit is completed by the anti-crush and “soft start” and “soft stop” functions.

The control electronics also comes complete with a display that monitors the programming stages and counts the number of manoeuvres carried out by the machine.

The irreversible reduction system guarantees the blocking of the gate in the closed position.
The manual emergency movement system is easy to operate using a personalised “locking-unlocking” key and rearming is automatic.

Discover the products

HL2524ESB

HL2524ESB

Encoder-controlled 24V self-locking unit for gates max. weight 350kg - max. opening angle 110°

Maximum gate length 3m

Maximum gate length 3m

Maximum opening angle 110°

Maximum opening angle 110°

Intensive use

Intensive use

Motors powered by 24V

Motors powered by 24V

Magnetic encoder control

Magnetic encoder control

Maximum gate weight 350kg

Maximum gate weight 350kg

Residential housing

Residential housing

Download the technical sheet
  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOX

Hot dip embedding case

  • complete with connection lever and adjustable mechanical travel limits.
  • Structure completely in stainless steel.
  • Stainless steel cover.
Embedding cases

HLBOXI

Stainless steel embedding case

  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOXC

Hot dip embedding case with an incorporated release mechanism

  • Manual release mechanism with a personalised key.
Manual release

SBLHL

Release mechanism with a personalised key for HLBOX - HLBOXI

  • Lever activated manual release system.
Manual release

SBLSHL

Lever activated release mechanism for HLBOX - HLBOXI

Accessory for 360° opening

ACCHL360

Accessory for 360° opening (HLBOX - HLBOXI)

  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
Electronic programmer

CC242ETOP

For the management of encoder-controlled swing gates

  • Electronic programmers for the management of one or two encoder-controlled motors
  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • NiMH batteries and battery charger included.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
ECU, battery charger and NiMH batteries

CC242ETOPCB

For the management of encoder-controlled swing gates + battery charger and NiMH batteries

  • Electronic programmers for the management of one or two encoder-controlled motors
  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • NiMH batteries and battery charger included.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
  • Overall dimensions 210 x 300 x 120
  • Overall dimensions 150 x 450 x 125
ECU, battery charger and NiMH batteries

CC242EXTOPCB

For the management of encoder-controlled swing gates + battery charger and NiMH batteries

  • Allows the programmers to work during blackouts.
Battery charger kit + NiMH batteries

KBNIMH-1

Battery charger kit + NiMH batteries

  • with end sleeves.
10-metre wiring cable

CABPC10

10-metre wiring cable

HL2524SB

HL2524SB

Encoder-controlled 24V self-locking unit for gates max. weight 350kg - max. opening angle 110°

Maximum gate length 3m

Maximum gate length 3m

Maximum opening angle 110°

Maximum opening angle 110°

Intensive use

Intensive use

Motors powered by 24V

Motors powered by 24V

Magnetic encoder control

Magnetic encoder control

Maximum gate weight 350kg

Maximum gate weight 350kg

Residential housing

Residential housing

Download the technical sheet
  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOX

Hot dip embedding case

  • complete with connection lever and adjustable mechanical travel limits.
  • Structure completely in stainless steel.
  • Stainless steel cover.
Embedding cases

HLBOXI

Stainless steel embedding case

  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOXC

Hot dip embedding case with an incorporated release mechanism

  • Manual release mechanism with a personalised key.
Manual release

SBLHL

Release mechanism with a personalised key for HLBOX - HLBOXI

  • Lever activated manual release system.
Manual release

SBLSHL

Lever activated release mechanism for HLBOX - HLBOXI

Accessory for 360° opening

ACCHL360

Accessory for 360° opening (HLBOX - HLBOXI)

  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
Electronic programmer

CC242ETOP

For the management of encoder-controlled swing gates

  • Electronic programmers for the management of one or two encoder-controlled motors
  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • NiMH batteries and battery charger included.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
ECU, battery charger and NiMH batteries

CC242ETOPCB

For the management of encoder-controlled swing gates + battery charger and NiMH batteries

  • Electronic programmers for the management of one or two encoder-controlled motors
  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • NiMH batteries and battery charger included.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
  • Overall dimensions 210 x 300 x 120
  • Overall dimensions 150 x 450 x 125
ECU, battery charger and NiMH batteries

CC242EXTOPCB

For the management of encoder-controlled swing gates + battery charger and NiMH batteries

  • Allows the programmers to work during blackouts.
Battery charger kit + NiMH batteries

KBNIMH-1

Battery charger kit + NiMH batteries

  • with end sleeves.
10-metre wiring cable

CABPC10

10-metre wiring cable

HL1824ESB

HL1824ESB

Encoder-controlled 24V self-locking unit for gates max. weight 350kg - max. opening angle 180-360°

Maximum gate length 3m

Maximum gate length 3m

Maximum opening angle 360°

Maximum opening angle 360°

Intensive use

Intensive use

Motors powered by 24V

Motors powered by 24V

Magnetic encoder control

Magnetic encoder control

Maximum gate weight 350kg

Maximum gate weight 350kg

Residential housing

Residential housing

Download the technical sheet
  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOX

Hot dip embedding case

  • complete with connection lever and adjustable mechanical travel limits.
  • Structure completely in stainless steel.
  • Stainless steel cover.
Embedding cases

HLBOXI

Stainless steel embedding case

  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOXC

Hot dip embedding case with an incorporated release mechanism

  • Manual release mechanism with a personalised key.
Manual release

SBLHL

Release mechanism with a personalised key for HLBOX - HLBOXI

  • Lever activated manual release system.
Manual release

SBLSHL

Lever activated release mechanism for HLBOX - HLBOXI

Accessory for 360° opening

ACCHL360

Accessory for 360° opening (HLBOX - HLBOXI)

  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
Electronic programmer

CC242ETOP

For the management of encoder-controlled swing gates

  • Electronic programmers for the management of one or two encoder-controlled motors
  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • NiMH batteries and battery charger included.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
ECU, battery charger and NiMH batteries

CC242ETOPCB

For the management of encoder-controlled swing gates + battery charger and NiMH batteries

  • Electronic programmers for the management of one or two encoder-controlled motors
  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • NiMH batteries and battery charger included.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
  • Overall dimensions 210 x 300 x 120
  • Overall dimensions 150 x 450 x 125
ECU, battery charger and NiMH batteries

CC242EXTOPCB

For the management of encoder-controlled swing gates + battery charger and NiMH batteries

  • Allows the programmers to work during blackouts.
Battery charger kit + NiMH batteries

KBNIMH-1

Battery charger kit + NiMH batteries

  • with end sleeves.
10-metre wiring cable

CABPC10

10-metre wiring cable

HL1824SB

HL1824SB

Encoder-controlled 24V self-locking unit for gates max. weight 350kg - max. opening angle 180-360°

Maximum gate length 3m

Maximum gate length 3m

Maximum opening angle 360°

Maximum opening angle 360°

Intensive use

Intensive use

Motors powered by 24V

Motors powered by 24V

Magnetic encoder control

Magnetic encoder control

Maximum gate weight 350kg

Maximum gate weight 350kg

Residential housing

Residential housing

Download the technical sheet
  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOX

Hot dip embedding case

  • complete with connection lever and adjustable mechanical travel limits.
  • Structure completely in stainless steel.
  • Stainless steel cover.
Embedding cases

HLBOXI

Stainless steel embedding case

  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOXC

Hot dip embedding case with an incorporated release mechanism

  • Manual release mechanism with a personalised key.
Manual release

SBLHL

Release mechanism with a personalised key for HLBOX - HLBOXI

  • Lever activated manual release system.
Manual release

SBLSHL

Lever activated release mechanism for HLBOX - HLBOXI

Accessory for 360° opening

ACCHL360

Accessory for 360° opening (HLBOX - HLBOXI)

  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
Electronic programmer

CC242ETOP

For the management of encoder-controlled swing gates

  • Electronic programmers for the management of one or two encoder-controlled motors
  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • NiMH batteries and battery charger included.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
ECU, battery charger and NiMH batteries

CC242ETOPCB

For the management of encoder-controlled swing gates + battery charger and NiMH batteries

  • Electronic programmers for the management of one or two encoder-controlled motors
  • Electronic programmer for encoder-controlled 24 Vdc motors that allow the precise position control of hinged gates fitted with a multi-decoding module S449 - S486 - S504 - S508.
  • NiMH batteries and battery charger included.
  • The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc. The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio channel.
  • Overall dimensions 210 x 300 x 120
  • Overall dimensions 150 x 450 x 125
ECU, battery charger and NiMH batteries

CC242EXTOPCB

For the management of encoder-controlled swing gates + battery charger and NiMH batteries

  • Allows the programmers to work during blackouts.
Battery charger kit + NiMH batteries

KBNIMH-1

Battery charger kit + NiMH batteries

  • with end sleeves.
10-metre wiring cable

CABPC10

10-metre wiring cable

HL251CL

HL251CL

230V self-locking unit for gates max. weight 550kg - max. opening angle 110°

Motors powered by 230V

Motors powered by 230V

Maximum gate length 3m

Maximum gate length 3m

Maximum opening angle 110°

Maximum opening angle 110°

Maximum gate weight 550kg

Maximum gate weight 550kg

Pre-wired connection cable

Pre-wired connection cable

Industial building

Industial building

Download the technical sheet
  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOX

Hot dip embedding case

  • complete with connection lever and adjustable mechanical travel limits.
  • Structure completely in stainless steel.
  • Stainless steel cover.
Embedding cases

HLBOXI

Stainless steel embedding case

  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOXC

Hot dip embedding case with an incorporated release mechanism

  • Manual release mechanism with a personalised key.
Manual release

SBLHL

Release mechanism with a personalised key for HLBOX - HLBOXI

  • Lever activated manual release system.
Manual release

SBLSHL

Lever activated release mechanism for HLBOX - HLBOXI

Accessory for 360° opening

ACCHL360

Accessory for 360° opening (HLBOX - HLBOXI)

  • The appliance is fitted with an interface for the insertion of a standard Cardin radio receiver card.
  • Digital work time control separately memorised for each gate leaf guided by a 6-digit display.
  • Possible operation without mechanical travel limits.
  • Torque setting.
  • Maximum power initial thrust control, torque limitation and deceleration management with deceleration zone control.
  • Suitable for the control of automatic gates and doors with two 230V motors.
Electronic programmers for the management of two 230V-motors

PRG230M2

For the management of 2 motorized gates or doors, maximum power yield 470 W + 470 W

HL2518CL

HL2518CL

230V self-locking unit for gates max. weight 550kg - max. opening angle 180-360°

Motors powered by 230V

Motors powered by 230V

Pre-wired connection cable

Pre-wired connection cable

Maximum gate length 3m

Maximum gate length 3m

Maximum opening angle 360°

Maximum opening angle 360°

Maximum gate weight 550kg

Maximum gate weight 550kg

Industial building

Industial building

Download the technical sheet
  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOX

Hot dip embedding case

  • complete with connection lever and adjustable mechanical travel limits.
  • Structure completely in stainless steel.
  • Stainless steel cover.
Embedding cases

HLBOXI

Stainless steel embedding case

  • complete with connection lever and adjustable mechanical travel limits.

  • Hot dip galvanized steel cover.

Embedding cases

HLBOXC

Hot dip embedding case with an incorporated release mechanism

  • Manual release mechanism with a personalised key.
Manual release

SBLHL

Release mechanism with a personalised key for HLBOX - HLBOXI

  • Lever activated manual release system.
Manual release

SBLSHL

Lever activated release mechanism for HLBOX - HLBOXI

Accessory for 360° opening

ACCHL360

Accessory for 360° opening (HLBOX - HLBOXI)

  • The appliance is fitted with an interface for the insertion of a standard Cardin radio receiver card.
  • Digital work time control separately memorised for each gate leaf guided by a 6-digit display.
  • Possible operation without mechanical travel limits.
  • Torque setting.
  • Maximum power initial thrust control, torque limitation and deceleration management with deceleration zone control.
  • Suitable for the control of automatic gates and doors with two 230V motors.
Electronic programmers for the management of two 230V-motors

PRG230M2

For the management of 2 motorized gates or doors, maximum power yield 470 W + 470 W

For any information, contact us without obligation

Required fields *

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.