Digital quartz radio controls with Rolling Codes

S504 - S508

Copertina S504 - S508
Wireless memory
Transceiver
App Cardin
433MHz
868MHz
Compatible with network interface

Titolo sulla descrizione serie

433MHz FM rolling code

2128 code combinations

Remote transmitter memorisation

RFID: Wireless memory

Aerial ANS400

Available transmitter channels 2-4-8

Available transceiver channels 2-4

Range 100 - 150m

More than 4 billion pre-coded transmitter codes

An extremely secure state-of-the-art radio control system with 128 bit cryptography. The system has gathered together a series of specific appliances under a single working protocol aimed at the remote control of automatic and security installations. Solutions for all possible uses: control of automatic installations for gates and doors, the command and control of automatic rolling shutters and sun blinds, the activation of alarm and access control systems as well as the activation of all ON-OFF or timer-controlled systems. Adopting the S504 - S508 system doesn’t just offer high levels of efficiency but also provides practicality for the user and an extremely useful and manageable appliance for the installer.

Network connectivity

The range interacts with an evolved system consisting of a server dedicated to the 4G connection by means of appliances and software for computers and smart phones.

Digital rolling code transmitters 128 bit with 2/4/8 channels

The transmitters, powered by a 3-volt lithium batteries (1 x CR2032) with a range of from 100 to 150 metres, are pre-coded in the factory with a unique identification number printed on the rear so as to allow memorisation in lots on the receiver and can be enabled without the presence of the receivers from a remote location through the use of a second transmitter that has already been memorised in the system. They are fitted with a key-lock function which when selected protects the appliance from any accidental activation and automatic shut down that cuts in after at least twenty seconds of continuous activation in order to reduce battery consumption. The bidirectional transmitters (transceivers) receive a confirmation signal allowing you to control an operation from a remote location.

Quartz receivers with the possibility of memorising up to 1000 user codes

The receivers are available in all the classic Cardin versions: outdoor receivers 12-24V with display, with LCD display and 4G functions in watertight cases IP55, mini receiver units to be installed in appliances which already have a protective casing and slot-in receiver cards for direct insertion into host appliances designed to receive them. A code and memory programming base via USB allows the transmitters to be memorised in blocks and access to the remote memorisation function thanks the to RFID technology fitted into the transmitters.

Discover the products

TXQ504C2

TXQ504C2

2-channel precoded transmitter 433MHz

433MHz

433MHz

S504

S504

5 2-channel keypad covers with 5 different colours

COVERMIX5002

5 two-channel keypad covers with 5 different colours

Transmitter wall / car support in dark grey

XACSUPTX500

Transmitter wall / car support in dark grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

433.92 MHz

TXQ508C2

TXQ508C2

2-channel precoded transmitter 868MHz

868MHz

868MHz

S508

S508

5 2-channel keypad covers with 5 different colours

COVERMIX5002

5 two-channel keypad covers with 5 different colours

Transmitter wall / car support in light grey

XACSUPTX500GC

Transmitter wall / car support in light grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

868 MHz

TXQ504C2N

TXQ504C2N

2-channel precoded transmitter 433MHz (without brand)

433MHz

433MHz

S504

S504

5 2-channel keypad covers with 5 different colours

COVERMIX5002

5 two-channel keypad covers with 5 different colours

Transmitter wall / car support in dark grey

XACSUPTX500

Transmitter wall / car support in dark grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

TXQ504C4

TXQ504C4

4-channel precoded transmitter 433MHz

433MHz

433MHz

S504

S504

5 4-channel keypad covers with 5 different colours

COVERMIX5004

5 four-channel keypad covers with 5 different colours

Transmitter wall / car support in dark grey

XACSUPTX500

Transmitter wall / car support in dark grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

433.92 MHz

TXQ508C4

TXQ508C4

4-channel precoded transmitter 868MHz

868MHz

868MHz

S508

S508

5 4-channel keypad covers with 5 different colours

COVERMIX5004

5 four-channel keypad covers with 5 different colours

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

Transmitter wall / car support in light grey

XACSUPTX500GC

Transmitter wall / car support in light grey

868 MHz

TXQ504C4N

TXQ504C4N

4-channel precoded transmitter 433MHz (without brand)

433MHz

433MHz

S504

S504

  • 10 4-channel keypad covers with 5 different colours.
Keypad covers

COVERMIX400

10 four-channel keypad covers with 5 different colours

Transmitter wall / car support in dark grey

XACSUPTX500

Transmitter wall / car support in dark grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

TXQ504C8

TXQ504C8

8-channel precoded transmitter 433MHz

433MHz

433MHz

S504

S504

Transmitter wall / car support in dark grey

XACSUPTX500

Transmitter wall / car support in dark grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

433.92 MHz

TXQ508C8

TXQ508C8

8-channel precoded transmitter 868MHz

868MHz

868MHz

S508

S508

Transmitter wall / car support in light grey

XACSUPTX500GC

Transmitter wall / car support in light grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

868 MHz

TXQ504BD2

TXQ504BD2

2-channel precoded transceiver (433MHz)

433MHz

433MHz

S504 Transceiver

S504 Transceiver

5 2-channel keypad covers with 5 different colours

COVERMIX5002

5 two-channel keypad covers with 5 different colours

Transmitter wall / car support in dark grey

XACSUPTX500

Transmitter wall / car support in dark grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

433.92 MHz

TXQ508BD2

TXQ508BD2

2-channel precoded transceiver (868MHz)

868MHz

868MHz

S508 Transceiver

S508 Transceiver

5 2-channel keypad covers with 5 different colours

COVERMIX5002

5 two-channel keypad covers with 5 different colours

Transmitter wall / car support in light grey

XACSUPTX500GC

Transmitter wall / car support in light grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

868 MHz

TXQ504BD4

TXQ504BD4

4-channel precoded transceiver (433MHz)

433MHz

433MHz

S504 Transceiver

S504 Transceiver

5 4-channel keypad covers with 5 different colours

COVERMIX5004

5 four-channel keypad covers with 5 different colours

Transmitter wall / car support in dark grey

XACSUPTX500

Transmitter wall / car support in dark grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

433.92 MHz

TXQ508BD4

TXQ508BD4

4-channel precoded transceiver (868MHz)

868MHz

868MHz

S508 Transceiver

S508 Transceiver

5 4-channel keypad covers with 5 different colours

COVERMIX5004

5 four-channel keypad covers with 5 different colours

Transmitter wall / car support in light grey

XACSUPTX500GC

Transmitter wall / car support in light grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

868 MHz

TXQPRO504-4

TXQPRO504-4

433MHz 4-channel S504 transmitter (internal aerial)

433MHz

433MHz

S504

S504

6V lithium battery pack

ZRL7.2-1.6

6V lithium battery pack

433.92 MHz

TXQPRO508-4

TXQPRO508-4

868MHz 4-channel S508 transmitter (internal aerial)

868MHz

868MHz

S508

S508

6V lithium battery pack

ZRL7.2-1.6

6V lithium battery pack

868 MHz

TXQPRO504-4A

TXQPRO504-4A

433MHz 4-channel S504 transmitter (external aerial)

433MHz

433MHz

S504

S504

6V lithium battery pack

ZRL7.2-1.6

6V lithium battery pack

433.92 MHz

TXQPRO508-4A

TXQPRO508-4A

868MHz 4-channel S508 transmitter (external aerial)

868MHz

868MHz

S508

S508

6V lithium battery pack

ZRL7.2-1.6

6V lithium battery pack

868 MHz

TXQPRO504BD-4

TXQPRO504BD-4

433MHz 4-channel S504 transceiver (internal aerial)

433MHz

433MHz

S504 Transceiver

S504 Transceiver

6V lithium battery pack

ZRL7.2-1.6

6V lithium battery pack

433.92 MHz

TXQPRO508BD-4

TXQPRO508BD-4

868MHz 4-channel S508 transceiver (internal aerial)

868MHz

868MHz

S508 Transceiver

S508 Transceiver

6V lithium battery pack

ZRL7.2-1.6

6V lithium battery pack

868 MHz

TXQPRO504BD-4A

TXQPRO504BD-4A

433MHz 4-channel S504 transceiver (external aerial)

433MHz

433MHz

S504 Transceiver

S504 Transceiver

6V lithium battery pack

ZRL7.2-1.6

6V lithium battery pack

433.92 MHz

TXQPRO508BD-4A

TXQPRO508BD-4A

868MHz 4-channel S508 transceiver (external aerial)

868MHz

868MHz

S508 Transceiver

S508 Transceiver

6V lithium battery pack

ZRL7.2-1.6

6V lithium battery pack

868 MHz

UNICO500MF

UNICO500MF

Programmable 100-channel radio control transceiver

S504

S504

S504 Transceiver

S504 Transceiver

433MHz

433MHz

S508

S508

S508 Transceiver

S508 Transceiver

868MHz

868MHz

Compatible with network interface

Compatible with network interface

433.92 MHz

TXWALL500MFB

TXWALL500MFB

Wall-mounted multifrequency battery-powered radio control transceiver

S449

S449

S486

S486

S504 Transceiver

S504 Transceiver

S508 Transceiver

S508 Transceiver

Wireless memory

Wireless memory

Transceiver

Transceiver

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

433.92 MHz

TXWALL500MFL

TXWALL500MFL

Wall mounted multifrequency radio control transceiver with power supply cable

S449

S449

S486

S486

S504 Transceiver

S504 Transceiver

S508 Transceiver

S508 Transceiver

Wireless memory

Wireless memory

Transceiver

Transceiver

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

433.92 MHz

PGBASE500

PGBASE500

Code and memory programming base via USB

SSB-504

SSB-504

Numerical code keypad (433MHz)

3V lithium battery pack

ZRA3.0-3.8-W

3V lithium battery pack

SSB-508

SSB-508

Numerical code keypad (868MHz)

3V lithium battery pack

ZRA3.0-3.8-W

3V lithium battery pack

RCQ504NC1

RCQ504NC1

433MHz 4-channel outdoor receiver (12/24Vac-dc)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • The relay can be set on the receiver to one of the functions.
Strip with 1 programmable relay

MCCMORPHM1

Strip with 1 programmable relay

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

433.92 MHz

RCQ508NC1

RCQ508NC1

868MHz 4-channel outdoor receiver (12/24Vac-dc)

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • The relay can be set on the receiver to one of the functions.
Strip with 1 programmable relay

MCCMORPHM1

Strip with 1 programmable relay

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

868 MHz

RCQ504ND1

RCQ504ND1

433MHz outdoor receiver with display (12/24Vac-dc)

433MHz

433MHz

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
1000-code vertical memory module

MCC24LC64

1000-code memory module (S504D1-S508D1)

433.92 MHz

RCQ508ND1

RCQ508ND1

868MHz outdoor receiver with display (12/24Vac-dc)

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
1000-code vertical memory module

MCC24LC64

1000-code memory module (S504D1-S508D1)

868 MHz

RVQ504C1

RVQ504C1

433MHz 1-channel mini receiver (230Vac)

433MHz

433MHz

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

433.92 MHz

RVQ508C1

RVQ508C1

868MHz 1-channel mini receiver (230Vac)

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

868 MHz

RVQ504C4

RVQ504C4

433MHz 4-channel outdoor receiver (230Vac)

433MHz

433MHz

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

433.92 MHz

RVQ508C4

RVQ508C4

868MHz 4-channel outdoor receiver (230Vac)

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

868 MHz

RQM504C1

RQM504C1

433MHz 1-channel mini receiver (12/24Vac-dc)

433MHz

433MHz

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
2-channel precoded transmitter 433MHz

TXQ504C2

2-channel precoded transmitter 433MHz

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
4-channel precoded transmitter 433MHz

TXQ504C4

4-channel precoded transmitter 433MHz

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
8-channel precoded transmitter 433MHz

TXQ504C8

8-channel precoded transmitter 433MHz

  • Industrial transmitters FM rolling code 433MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transmitter (internal aerial)

TXQPRO504-4

433MHz 4-channel S504 transmitter (internal aerial)

  • Industrial transmitters FM rolling code 433MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transmitter (external aerial)

TXQPRO504-4A

433MHz 4-channel S504 transmitter (external aerial)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
2-channel precoded transceiver (433MHz)

TXQ504BD2

2-channel precoded transceiver (433MHz)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
4-channel precoded transceiver (433MHz)

TXQ504BD4

4-channel precoded transceiver (433MHz)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
  • Version without tradenmark
2-channel precoded transmitter 433MHz (without brand)

TXQ504C2N

2-channel precoded transmitter 433MHz (without brand)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
  • Version without tradenmark
4-channel precoded transmitter 433MHz (without brand)

TXQ504C4N

4-channel precoded transmitter 433MHz (without brand)

  • Container in shockproof polycarbonate IP57.
  • 3V lithium battery power supply (ZRA3.0-3.8-W).
  • Number of available code combinations: 1.000.000.
  • Possibility of memorising up to 500 user codes.
  • Manages up to 4 distinct functions and communicates with all S504 (433MHz) standard receivers.
  • Backlighting is controlled by a proximity light sensor.
Numerical code keypad

SSB-504

Numerical code keypad (433MHz)

Aerial for 433MHz receivers

ANS400

Aerial for 433MHz receivers

Coaxial cable RG58 (per metre)

ZVCRG58

Coaxial cable RG58 (per metre)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

433.92 MHz

RQM508C1

RQM508C1

868MHz 1-channel mini receiver (12/24Vac-dc)

868MHz

868MHz

S508

S508

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
2-channel precoded transmitter 868MHz

TXQ508C2

2-channel precoded transmitter 868MHz

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
4-channel precoded transmitter 868MHz

TXQ508C4

4-channel precoded transmitter 868MHz

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
8-channel precoded transmitter 868MHz

TXQ508C8

8-channel precoded transmitter 868MHz

  • Industrial transmitters FM rolling code, 868MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transmitter (internal aerial)

TXQPRO508-4

868MHz 4-channel S508 transmitter (internal aerial)

  • Industrial transmitters FM rolling code, 868MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transmitter (external aerial)

TXQPRO508-4A

868MHz 4-channel S508 transmitter (external aerial)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
2-channel precoded transceiver (868MHz)

TXQ508BD2

2-channel precoded transceiver (868MHz)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
4-channel precoded transceiver (868MHz)

TXQ508BD4

4-channel precoded transceiver (868MHz)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
  • Version without tradenmark
2-channel precoded transmitter 868MHz (without brand)

TXQ508C2N

2-channel precoded transmitter 868MHz (without brand)

  • Container in shockproof polycarbonate IP57.
  • 3V lithium battery power supply (ZRA3.0-3.8-W).
  • Number of available code combinations: 1.000.000.
  • Possibility of memorising up to 500 user codes.
  • Manages up to 4 distinct functions and communicates with all S508 (868MHz) standard receivers.
  • Backlighting is controlled by a proximity light sensor.
Numerical code keypad

SSB-508

Numerical code keypad (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

Aerial for 868MHz receivers

ANQ800-1

Aerial for 868MHz receivers

Coaxial cable RG58 (per metre)

ZVCRG58

Coaxial cable RG58 (per metre)

868 MHz

RQM504C2

RQM504C2

433MHz 2-channel mini receiver (12/24Vac-dc)

433MHz

433MHz

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

433.92 MHz

RQM508C2

RQM508C2

868MHz 2-channel mini receiver (12/24Vac-dc)

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

868 MHz

RSQ504C2

RSQ504C2

433MHz 2-channel slot-in receiver card (24Vac-dc)

433MHz

433MHz

S504

S504

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Container in shockproof polycarbonate IP57.
  • 3V lithium battery power supply (ZRA3.0-3.8-W).
  • Number of available code combinations: 1.000.000.
  • Possibility of memorising up to 500 user codes.
  • Manages up to 4 distinct functions and communicates with all S504 (433MHz) standard receivers.
  • Backlighting is controlled by a proximity light sensor.
Numerical code keypad

SSB-504

Numerical code keypad (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • Allows you to use the AMP 10-way receiver card connector as a standard terminal block.
Slot-in receiver adaptor

RSQSPP

Slot-in receiver adaptor

433.92 MHz

RSQ508C2

RSQ508C2

868MHz 2-channel slot-in receiver card (24Vac-dc)

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Container in shockproof polycarbonate IP57.
  • 3V lithium battery power supply (ZRA3.0-3.8-W).
  • Number of available code combinations: 1.000.000.
  • Possibility of memorising up to 500 user codes.
  • Manages up to 4 distinct functions and communicates with all S508 (868MHz) standard receivers.
  • Backlighting is controlled by a proximity light sensor.
Numerical code keypad

SSB-508

Numerical code keypad (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • Allows you to use the AMP 10-way receiver card connector as a standard terminal block.
Slot-in receiver adaptor

RSQSPP

Slot-in receiver adaptor

868 MHz

RSQ504OC2

RSQ504OC2

433MHz 2-channel open collector receiver card (5Vdc)

433MHz

433MHz

S504

S504

  • Container in shockproof plastic material.
  • 3,7V power supply with Li-Poly rechargeable battery.
  • Overall dimensions 48 x 125 x 12.
  • 433 - 868 MHz FM multifrequency rolling code

  • 2128 code combinations
  • Remote memorisation

  • RFID: Wireless memory

  • Mono- and bidirectional operation

  • Available channels 100

  • Range 100 - 150m

  • More than 4 billion pre-coded transmitter codes

  • Li-Poly rechargeable battery
  • 128-bit rolling code digital radio control with 100 channels

  • State-of-the-art digital remote control with a high degree of security guaranteed by 128-bit encryption. The system groups in ONE device, a number of specific, mono and bidirectional functions with both 433 Mhz and 868 Mhz frequencies, suitable for remote control of automation and security systems. 100 channels for the control of automated door and gate systems, the command and control of awning and roller shutter automation systems, activation of alarm and access control systems, and all kinds of ON-OFF or timed activations. A UNIQUE radio control that offers extreme convenience of use for the user and a high level of convenience of use and management for the installer.

  • The 3.7V Li-Poly rechargeable battery-powered remote control comes with a type C adapter cable for easy charging and configuration from a personal computer. It has a digital display (with programmable auto-off function to limit battery consumption) that allows the setting of events, groups and scenarios. Thanks to the presence of the real-time clock, it is possible to adjust the opening and closing at different times of the day taking into account 3 weekly time slots (Mon-Fri, Sa-Sun, Mon-Thu).

  • Connected to a two-way receiver The radio control receives a confirmation signal making it possible to control the "commanded" operation even in the absence of field of view.

Programmable 100-channel radio control transceiver

UNICO500MF

Programmable 100-channel radio control transceiver

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
2-channel precoded transmitter 433MHz

TXQ504C2

2-channel precoded transmitter 433MHz

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
4-channel precoded transmitter 433MHz

TXQ504C4

4-channel precoded transmitter 433MHz

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
8-channel precoded transmitter 433MHz

TXQ504C8

8-channel precoded transmitter 433MHz

  • Industrial transmitters FM rolling code 433MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transmitter (external aerial)

TXQPRO504-4A

433MHz 4-channel S504 transmitter (external aerial)

  • Industrial transmitters FM rolling code 433MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transmitter (internal aerial)

TXQPRO504-4

433MHz 4-channel S504 transmitter (internal aerial)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
2-channel precoded transceiver (433MHz)

TXQ504BD2

2-channel precoded transceiver (433MHz)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
4-channel precoded transceiver (433MHz)

TXQ504BD4

4-channel precoded transceiver (433MHz)

  • Industrial transceiver FM rolling code 433MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transceiver (external aerial)

TXQPRO504BD-4A

433MHz 4-channel S504 transceiver (external aerial)

  • Industrial transceiver FM rolling code 433MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transceiver (internal aerial)

TXQPRO504BD-4

433MHz 4-channel S504 transceiver (internal aerial)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
  • Version without tradenmark
2-channel precoded transmitter 433MHz (without brand)

TXQ504C2N

2-channel precoded transmitter 433MHz (without brand)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
  • Version without tradenmark
4-channel precoded transmitter 433MHz (without brand)

TXQ504C4N

4-channel precoded transmitter 433MHz (without brand)

  • Container in shockproof polycarbonate IP57.
  • 3V lithium battery power supply (ZRA3.0-3.8-W).
  • Number of available code combinations: 1.000.000.
  • Possibility of memorising up to 500 user codes.
  • Manages up to 4 distinct functions and communicates with all S504 (433MHz) standard receivers.
  • Backlighting is controlled by a proximity light sensor.
Numerical code keypad

SSB-504

Numerical code keypad (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

Aerial for 433MHz receivers

ANS400

Aerial for 433MHz receivers

Coaxial cable RG58 (per metre)

ZVCRG58

Coaxial cable RG58 (per metre)

433.92 MHz

RSQ508OC2

RSQ508OC2

868MHz 2-channel open collector receiver card (5Vdc)

868MHz

868MHz

S508

S508

  • Container in shockproof plastic material.
  • 3,7V power supply with Li-Poly rechargeable battery.
  • Overall dimensions 48 x 125 x 12.
  • 433 - 868 MHz FM multifrequency rolling code

  • 2128 code combinations
  • Remote memorisation

  • RFID: Wireless memory

  • Mono- and bidirectional operation

  • Available channels 100

  • Range 100 - 150m

  • More than 4 billion pre-coded transmitter codes

  • Li-Poly rechargeable battery
  • 128-bit rolling code digital radio control with 100 channels

  • State-of-the-art digital remote control with a high degree of security guaranteed by 128-bit encryption. The system groups in ONE device, a number of specific, mono and bidirectional functions with both 433 Mhz and 868 Mhz frequencies, suitable for remote control of automation and security systems. 100 channels for the control of automated door and gate systems, the command and control of awning and roller shutter automation systems, activation of alarm and access control systems, and all kinds of ON-OFF or timed activations. A UNIQUE radio control that offers extreme convenience of use for the user and a high level of convenience of use and management for the installer.

  • The 3.7V Li-Poly rechargeable battery-powered remote control comes with a type C adapter cable for easy charging and configuration from a personal computer. It has a digital display (with programmable auto-off function to limit battery consumption) that allows the setting of events, groups and scenarios. Thanks to the presence of the real-time clock, it is possible to adjust the opening and closing at different times of the day taking into account 3 weekly time slots (Mon-Fri, Sa-Sun, Mon-Thu).

  • Connected to a two-way receiver The radio control receives a confirmation signal making it possible to control the "commanded" operation even in the absence of field of view.

Programmable 100-channel radio control transceiver

UNICO500MF

Programmable 100-channel radio control transceiver

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
2-channel precoded transmitter 868MHz

TXQ508C2

2-channel precoded transmitter 868MHz

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
4-channel precoded transmitter 868MHz

TXQ508C4

4-channel precoded transmitter 868MHz

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
8-channel precoded transmitter 868MHz

TXQ508C8

8-channel precoded transmitter 868MHz

  • Industrial transmitters FM rolling code, 868MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transmitter (internal aerial)

TXQPRO508-4

868MHz 4-channel S508 transmitter (internal aerial)

  • Industrial transmitters FM rolling code, 868MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transmitter (external aerial)

TXQPRO508-4A

868MHz 4-channel S508 transmitter (external aerial)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
2-channel precoded transceiver (868MHz)

TXQ508BD2

2-channel precoded transceiver (868MHz)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
4-channel precoded transceiver (868MHz)

TXQ508BD4

4-channel precoded transceiver (868MHz)

  • Industrial transceiver FM rolling code 868MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transceiver (internal aerial)

TXQPRO508BD-4

868MHz 4-channel S508 transceiver (internal aerial)

  • Industrial transceiver FM rolling code 868MHz
  • Container in shockproof, water-proof material IP65.
  • Power supply 6V with lithium batteries 2 x CR123A.
4-channel transceiver (external aerial)

TXQPRO508BD-4A

868MHz 4-channel S508 transceiver (external aerial)

  • Container in shockproof plastic material.
  • 3V lithium battery power supply CR2032.
  • Overall dimensions 35 x 80 x 11.
  • Version without tradenmark
2-channel precoded transmitter 868MHz (without brand)

TXQ508C2N

2-channel precoded transmitter 868MHz (without brand)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

Aerial for 868MHz receivers

ANQ800-1

Aerial for 868MHz receivers

Coaxial cable RG58 (per metre)

ZVCRG58

Coaxial cable RG58 (per metre)

868 MHz

RPQ504T10

RPQ504T10

433MHz radio-programmer for rolling shutters (230V-1000W)

433MHz

433MHz

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

433.92 MHz

RPQ508T10

RPQ508T10

868MHz radio-programmer for rolling shutters (230V-1000W)

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

868 MHz

RPQ504

RPQ504

Radio-programmer for rolling shutters (230V-600W)

433MHz

433MHz

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

433.92 MHz

RPQ508

RPQ508

868MHz radio-programmer for rolling shutters (230V-600W)

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

868 MHz

RPQ504IT0

RPQ504IT0

Radio-programmer ON/OFF (433MHz) + timer (2000W)

433MHz

433MHz

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

433.92 MHz

RPQ508IT0

RPQ508IT0

Radio-programmer ON/OFF (868MHz) + timer (2000W)

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

868 MHz

RPQ504RNA0

RPQ504RNA0

433MHz radio-programmer for awnings and rolling shutters (400W)

433MHz

433MHz

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • Wind speed sensor (with wall bracket).
  • The wind sensor can be used with all electronic devices that feature a potential free “anemometer” contact.
  • Overall dimensions 240 x 220 x 71.
Anemometer

SW01

Anemometer

433.92 MHz

RPQ508RNA0

RPQ508RNA0

Radio-programmer for awnings and rolling shutters (400W)

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • Wind speed sensor (with wall bracket).
  • The wind sensor can be used with all electronic devices that feature a potential free “anemometer” contact.
  • Overall dimensions 240 x 220 x 71.
Anemometer

SW01

Anemometer

868 MHz

RCQ504W00

RCQ504W00

Decodes the TXQ504-DKS1000T input and outputs a digital signal

433MHz

433MHz

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (433MHz)

JRF433QFMBD0

Quartz transceiver module (433MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • The interface with a Bluetooth module allows the control of four relays with NO or NC contacts.
  • The selection dip-switches (one block per relay) allow you to select the relay's activation method: impulsive, ON/OFF, timer controlled or remotely controlled relay activation using the programming calender in the Cardin multiprotocol interface Cardin RCQ504/508W00.
  • The programming buttons (one per relay) allow you to set the activation times for the relays (from 1 s to 5 min) for the timer controlled mode.
  • The Bluetooth module MODBT is to be ordered separately.
  • Power supply 12/24Vac-dc
  • Electrical input 50mA
  • Overall dimensions 95 x 75 x 25.
  • Indoor box IP20.
Bluetooth interface with four relays

INTBTC4

Bluetooth interface with four relays

  • The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.

Bluetooth module

MODBT

Bluetooth interface module for the X24 multi-decoding series

433.92 MHz

RCQ508W00

RCQ508W00

Decodes the TXQ508-DKS1000T input and outputs a digital signal

868MHz

868MHz

S508

S508

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (868MHz)

JRF868QFMDG1

Quartz receiver module (868MHz)

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz transceiver module (868MHz)

JRF868QFMBD0

Quartz transceiver module (868MHz)

  • Extractable and furnished with non volatile memory, this EEPROM contains the system code.
Memory module (max. 1000 codes)

ZGB24LC64-I/P

Memory module (max. 1000 codes)

  • Dispositivo che fornisce in uscita una tensione regolata a 24Vdc partendo da una tensione continua in ingresso che può variare da 19Vdc a 38Vdc. Dispone di due LED di segnalazione, uno per identificare la presenza di tensione in uscita e l’altro per dare informazioni sullo stato (funzionamento corretto, sovraccarico, protezione attivata).
Voltage regulator stabilized at 24V (series PRG900)

SELINTCV

The device supplies a regulated 24Vdc voltage in output

  • The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.

Bluetooth module

MODBT

Bluetooth interface module for the X24 multi-decoding series

  • The interface with a Bluetooth module allows the control of four relays with NO or NC contacts.
  • The selection dip-switches (one block per relay) allow you to select the relay's activation method: impulsive, ON/OFF, timer controlled or remotely controlled relay activation using the programming calender in the Cardin multiprotocol interface Cardin RCQ504/508W00.
  • The programming buttons (one per relay) allow you to set the activation times for the relays (from 1 s to 5 min) for the timer controlled mode.
  • The Bluetooth module MODBT is to be ordered separately.
  • Power supply 12/24Vac-dc
  • Electrical input 50mA
  • Overall dimensions 95 x 75 x 25.
  • Indoor box IP20.
Bluetooth interface with four relays

INTBTC4

Bluetooth interface with four relays

868 MHz

TXQ508C2N

TXQ508C2N

2-channel precoded transmitter 868MHz (without brand)

868MHz

868MHz

S508

S508

5 2-channel keypad covers with 5 different colours

COVERMIX5002

5 two-channel keypad covers with 5 different colours

Transmitter wall / car support in light grey

XACSUPTX500GC

Transmitter wall / car support in light grey

3V lithium battery (2 X CR2032)

XRP03

3V lithium battery (2 X CR2032)

For any information, contact us without obligation

Required fields *

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.