Access control systems

CARHF

Copertina CARHF
Motors powered by 12V
GSM
Real-time clock
Compatible with network interface
S504
S504 Transceiver
433MHz

Titolo sulla descrizione serie

This series of access control devices is the ideal solution for multi-user buildings, apartment blocks, residence halls, hotels, commercial and industrial businesses and any other location that requires you to program and manage access controls.

CARHF4G-10 (includes a prepaid SIM with a ten year subscription) and CARHF4G (free choice of telephone operator) are access control systems with 4 contacts (two potential free and two open collector) allowing you to manage external devices which permit the remote activation of electrical and electronic systems (gates, doors, lights etc.).

The receiver allows you to memorise up to 1000 transmitters, connect one or two transponder readers and one or two numerical code keyboards and by inserting a compatible SIM it my also be activated telephonically.

The choice of provider (SIM CARD) is free but the SIM must not contain a PIN. The devices are managed via internet using the "MyCardin.com" website which allows you to manage the access privileges, the activation and deactivation of the outputs using a real-time clock and the memorization, cancellation of transmitters etc.

PLEASE NOTE! This product requires a sufficient level of GSM coverage to ensure its correct operation. We advise you therefore to contact your local provider for more information.

Technical description

All weather box in ABS - IP55 (148 x 118 x 40).

Digital display with real-time function display (relay status, user, clock, etc.).

Stores up to 1000 S504 mono-/bi-directional transmitters and S449 mono-directional transmitters.

Free choice of telephone operator (SIM CARD).

Connections for a transponder reader and a keypad.

Activation via telephone.

Programming via SMS.

Data programming via internet using "MyCardin.com".

Four command contacts (2 potential free and 2 OC) for external devices (gates, doors, lighting systems).

12 Vdc power supply.

Real-time clock and holiday program management (unlimited).

Management of access privileges.

Discover the products

CARHF4G-10

CARHF4G-10

The receiver includes a 10 year subscription (for data updating) with our partner

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Surface-mounting IP57.
  • The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one confirm key (*) and one cancel key (#) by means of which it is possible to program the backlighting and other operational parameters. It is suitable for connection with the DKS security system via a shielded unipolar wire carrying both the power supply and the data line. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2 system (consult the Liberté catalogue).
  • Dimensions 72 x 104 x 26.

Keypad with backlighting

DKS1000T

Keypad with backlighting

  • Surface-mounting IP57.
  • Using dip-switch settings it is possible to program the backlighting and other operational parameters. It is suitable for connection with the DKS security system via a shielded unipolar wire carrying both the power supply and the data line. Allows the interface to be activated by proximity reading an S500 transmitter, a TAG or a CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2 system (consult the Liberté catalogue).
  • Dimensions 74 x 130 x 24.
Transponder reader

DKSTPT

Transponder reader

  • Surface-mounting IP57.
  • Using dip-switch settings it is possible to program the backlighting and other operational parameters. It is suitable for connection with the DKS security system via a shielded unipolar wire carrying both the power supply and the data line. Allows the interface to be activated by proximity reading an S500 transmitter, a TAG or a CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2 system (consult the Liberté catalogue).
  • Dimensions 70 x 70 x 24
Transponder reader in a zama case

DKSTPMT

Transponder reader in a zama case

  • External aerial + 3 m GSM cable, only compatible with the series CARHF4G
Aerial + 3 m GSM cable

CARANTGSM1

Aerial + 3 m GSM cable

433.92 MHz

CARHF4G

CARHF4G

The receiver allows a free choice of telephone operator

  • Superheterodyne in FM with a digital filter.
  • RF module without decoder for the reception of digital signals.
  • Voltage: 5Vdc - Electrical input: 15mA.
  • Overall dimensions 40 x 20 x 13.
Quartz receiver module (433MHz)

JRF433QFMDG1

Quartz receiver module (433MHz)

  • Surface-mounting IP57.
  • The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one confirm key (*) and one cancel key (#) by means of which it is possible to program the backlighting and other operational parameters. It is suitable for connection with the DKS security system via a shielded unipolar wire carrying both the power supply and the data line. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2 system (consult the Liberté catalogue).
  • Dimensions 72 x 104 x 26.

Keypad with backlighting

DKS1000T

Keypad with backlighting

  • Surface-mounting IP57.
  • Using dip-switch settings it is possible to program the backlighting and other operational parameters. It is suitable for connection with the DKS security system via a shielded unipolar wire carrying both the power supply and the data line. Allows the interface to be activated by proximity reading an S500 transmitter, a TAG or a CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2 system (consult the Liberté catalogue).
  • Dimensions 74 x 130 x 24.
Transponder reader

DKSTPT

Transponder reader

  • Surface-mounting IP57.
  • Using dip-switch settings it is possible to program the backlighting and other operational parameters. It is suitable for connection with the DKS security system via a shielded unipolar wire carrying both the power supply and the data line. Allows the interface to be activated by proximity reading an S500 transmitter, a TAG or a CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2 system (consult the Liberté catalogue).
  • Dimensions 70 x 70 x 24
Transponder reader in a zama case

DKSTPMT

Transponder reader in a zama case

  • External aerial + 3 m GSM cable, only compatible with the series CARHF4G
Aerial + 3 m GSM cable

CARANTGSM1

Aerial + 3 m GSM cable

433.92 MHz

For any information, contact us without obligation

Required fields *

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.