A complete automatic device suitable for moving all types of counterbalanced garage doors. The compact and solid form makes this product a versatile machine that may be used safely and efficiently on all types of counterbalanced garage doors.
The automation consists of a compact geared reduction unit (with an incorporated encoder and bilateral manual release system) and is fitted with a reduction system made from materials that allow maximum efficiency and minimum noise. All the components making up the device: geared motor, transformer, electronic programmer are mounted on a robust chassis made of shockproof plastic and are separated and protected by a double carter that completely covers all the moving parts and safely houses all the cables and wiring.
The second removable cover allows access to all the setting and program functions in complete safety. Internally, the carter contains the mechanism required to activate the manual release system and this allows the manoeuvre to be fluid and manageable under all working conditions whilst at the same time covering all possible manual release mechanisms installed by the door manufacturers: a handle directly installed on the geared motor, an external release cord or via a hexagonal key operated mechanism that is accessed through the door panel both to the right and to the left of the motor.
The door position is encoder controlled and self-programming thus reducing installation times to a minimum and optimising the programming procedure. Repositioning takes place automatically whenever foreign objects get in the way of the door as it is moving. The electronic control unit is completed by the anti-crush and “soft start” and “soft stop” (24V version only) functions and a display that monitors the programming stages and counts the number of manoeuvres carried out by the machine.
Multi-decoding
The product range is factory fitted with a multi-decoding remote control module (system S449 - S486 - S504 - S508). By default the devices are supplied with a 433MHz RF module and the S504 / S508 series memory module inserted. To control the device with S449 transmitters, insert the ZGB24LC16-I / P memory module (supplied with the device) and consult the relevant section. For the S508 / S486 series purchase and insert the 868Mhz RF module.
For garage doors larger than 4 metres and for garage doors with an in-built pedestrian door (mounted laterally) a second slave motor is required.
Compatible with the data exchange system between digital devices (smartphone, tablet, etc.) and the Cardin multifunctional control units.
The Bluetooth module MODBT is to be ordered separately.
Encoder-controlled self-locking 24V master unit
Motors powered by 24V
Built-in programmer
Maximum door height 2.7m
Maximum door surface area 11mq
Intensive use
Opening and closing deceleration system
Built-in NiMH batteries
Two adjustable axle shaft supports
GL20-GLSTAR adapter kit
Transmission shaft 20cm. Including support
Transmission shaft 150cm. Including support
Transmission shaft 200cm. Including support
Two straight arms with round bushing for AT shafts
Straight arm with grooved bushing for motor drive shaft
Two curved arms with round bushing for AT shafts.
Motor support extension bracket, 2000mm
Motor support extension bracket, 600mm
Motor support extension bracket, 600mm
External release cord, length 2000mm
Quartz receiver module (433MHz)
Quartz receiver module (433MHz)
Quartz receiver module (868MHz)
Quartz receiver module (868MHz)
Quartz transceiver module (433MHz)
Quartz transceiver module (868MHz)
300-code memory module (S449 - S486)
Memory module (max. 1000 codes)
Battery charger kit + NiMH batteries
Travel limit switch kit
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
433.92 MHz
Slave unit
Motors powered by 24V
Maximum door height 2.7m
Maximum door surface area 11mq
Encoder-controlled self-locking master unit with encoder 230V
Motors powered by 230V
Built-in programmer
Maximum door height 2.7m
Maximum door surface area 11mq
Bluetooth compatible
Two adjustable axle shaft supports
GL20-GLSTAR adapter kit
Transmission shaft 20cm. Including support
Transmission shaft 150cm. Including support
Transmission shaft 200cm. Including support
Two straight arms with round bushing for AT shafts
Straight arm with grooved bushing for motor drive shaft
Two curved arms with round bushing for AT shafts.
Motor support extension bracket, 2000mm
Motor support extension bracket, 600mm
Motor support extension bracket, 600mm
External release cord, length 2000mm
Quartz receiver module (433MHz)
Quartz receiver module (433MHz)
Quartz receiver module (868MHz)
Quartz receiver module (868MHz)
Quartz transceiver module (433MHz)
Quartz transceiver module (868MHz)
300-code memory module (S449 - S486)
Memory module (max. 1000 codes)
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface and also allows you to connect two motors via cable in order to use the synchronised master/slave function.
Data interface module via cable (master/slave)
The module allows the exchange of information between the motor's electronic control unit and the Cardin 4G interface via Bluetooth or directly between the control units and the apps CRD ONE and CRD TWO.
Bluetooth interface module for the X24 multi-decoding series
433.92 MHz
Slave unit
Motors powered by 230V
Maximum door height 2.7m
Maximum door surface area 11mq
